Gas Chromatography identifies the process of analysis of compounds using gas chromatograph- a machine that perform the analysis of compounds after being separated from the sample and has been vaporized. A column inlet, also known as injector helps to take away the compounds from the sample, vaporizes and injects them into the column of the chromatograph.

The purge and gas chromatography is normally performed to analyze the compounds which are occurring at the low parts per billion levels. In addition, it involves a purge and trap column inlet.

Purging and Trapping

After the sample has been transported to the column inlet, either through autosampler or manually, it will undergo the following process of purging and trapping before being injected into the columns of chromatograph:

The inter gas is bubbled via the sample and releases the compounds
The released compounds are trapped on an absorbent material within the concentrator
The concentrator is heater till the compound is vaporized
Once the compound gets vaporized, they’re transported back to the column on a steam of gases. This process is called because the Mobile Phase of GC. This step concludes the purge and the trap process and then starts the chromatography process that occurs in the next manner:

The compounds firstly enter the column
Then they are passed through a liquid called stationary phase. The compounds then exit the column and enter analyzer
They’re detected and identified
In the labs such processes are initiated via autosampler that shifts the sample to column inlet.

Common Applications

The most frequent and usual application for purge and trap gas chromatography is analyzing the VOCs- Volatile Organic Compounds. They are the naturally occurring elements that cause adverse health effects and environmental damage. They’re toxic to humans and animal even if consumed in small amounts.

They have a tendency to vaporize at room temperature that helps them pervade the environment. VOC analysis may be the very best known application for GC but its not the only person. They are also being used to assess the ramifications of certain compounds on taste and smell of various foods, beverages and cosmetic products and also fragrances.

Conclusion

Purge and trap gas chromatography is useful for low level compounds in liquid and soil samples that threatened safety to environment and products. The goal of Gas Chromatography is to analyze those compounds that are present at a low PPB level. The accuracy of the procedure depends on using right kind of inlets, columns and the ones who perform the purge and trap function.

Purge and trap gas chromatography can be used to evaluate low level compounds. Purge and trap equipment can be bought online or offline form suppliers at cheap prices. You are advised to choose quality products to retain preciseness of results and process. Since headspace sampler are based on small elements, it is crucial to keep the accuracy sharp right form start.